Our eStore remains open for you 24/7, rain or shine! 😎

Collection:

MOSPEC

16 products
Regular price $25.00 USD
Sale price $25.00 USD
Regular price
Unit price
per 
The tool provides 4 thread pitches of M10 x 1.0, M10 x 1.25, M12 x 1.0 and M12 x 1.25 which will work on almost any known street fork.
Regular price $106.00 USD
Sale price $106.00 USD
Regular price
Unit price
per 
Set fits bearing with 8-30 mm I.D. and 32-47 mm O.D. Set provides one durable steel handle and 12 sizes of anodized aluminium adapters :8mm, 10mm, 12mm, 15mm, 17mm, 20mm, 25mm, 30mm, 32mm, 35mm, 40...
Regular price $10.00 USD
Sale price $10.00 USD
Regular price
Unit price
per 
This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil.
Regular price $37.00 USD
Sale price $37.00 USD
Regular price
Unit price
per 
Ideal tool to hold the clutch drum in place which can remove the nut holding it on. This holder is equipped with two bolts and washers, the mounting holes are slotted so that are easier to install ...
Regular price $19.00 USD
Sale price $19.00 USD
Regular price
Unit price
per 
Ideal tool to truly add or remove fluid from the hydraulic clutch. Fits all KTM motorcycles with hydraulic clutch.
Regular price $104.00 USD
Sale price $104.00 USD
Regular price
Unit price
per 
It is twist-proof with screws of clutch cover fixed to the engine housing.The additional adapter ring provides height compensation for the 48 tooth clutches. Fits all standard 12-tooth baskets of D...
Regular price $66.00 USD
Sale price $66.00 USD
Regular price
Unit price
per 
A sturdy stand holds cylinder heads safely and securely while you repair cracks, grind seats, clean carbon or perform guide work.There is ample clearance under heads for knurling and reaming valve ...
Regular price $31.00 USD
Sale price $31.00 USD
Regular price
Unit price
per 
Allows the damping rod to retrieve effortlessly after spring installation.Works on Kayaba, Showa and WP inverted forks. Tool provides one rod w/ M10x1.0 end and four brass hex adapters are included...
Regular price $31.00 USD
Sale price $31.00 USD
Regular price
Unit price
per 
It can easily thread onto the damping rod to facilitate cartridge fork bleeding and prevent the typical mess when changing fork oil. Set provides adapters for 10mm x 1.0mm, 12mm x 1.0mm, 12mm x 1.2...
Regular price $25.00 USD
Sale price $25.00 USD
Regular price
Unit price
per 
Used to fill shocks with self-sealing type rubber valve.
Regular price $30.00 USD
Sale price $30.00 USD
Regular price
Unit price
per 
Ideal tool to detach a piston from the disk brake base of a motor vehicle. The adjusting screw design, which is able to adjust the distance between two grasping portions and make the outer walls of...
Regular price $82.00 USD
Sale price $82.00 USD
Regular price
Unit price
per 
Used to replace the compression needle from the shock body on WP PDS shocks.It has two locator washers that allow the tool to rest inside the shock body and not get skewed while tightening or loose...
Regular price $43.00 USD
Sale price $43.00 USD
Regular price
Unit price
per 
Ideal for most makes and models of motorcycles, ATVs and ATCs. Material: SC-M440Set contains three wrenches (8, 9 & 10mm) and three adjusters (screw type and 3 & 4mm square-type).Interchang...
Regular price $22.00 USD
Sale price $22.00 USD
Regular price
Unit price
per 
Used to accurately locate top dead center of the piston’s stroke.Use this tool, you will not have to remove the plug and measure it.Use this tool with a cam degree wheel to dial in the cam for maxi...
Regular price $29.00 USD
Sale price $29.00 USD
Regular price
Unit price
per 
Spoon type end and anti-slip handle design makes your tire changing task easier.
Regular price $10.00 USD
Sale price $10.00 USD
Regular price
Unit price
per 
Ideal tool to remove and install standard valve cores in tubed or tubeless valve stems (Schrader valve) easily.