Our eStore remains open for you 24/7, rain or shine! 😎

All Products

978 products
Availability Show all Availability
Price
  • -
Show all Price
Shock Needle Tool (For KTM) Shock Needle Tool (For KTM)
$108.00 SGD
$108.00 SGD
Used to replace the compression needle from the shock body on WP PDS shocks.It has two locator washers that allow the tool to rest inside the shock body and not get skewed while tightening or loose...
Cylinder Head Holders Cylinder Head Holders
$86.00 SGD
$86.00 SGD
A sturdy stand holds cylinder heads safely and securely while you repair cracks, grind seats, clean carbon or perform guide work.There is ample clearance under heads for knurling and reaming valve ...
Nitrogen Needle Kit Nitrogen Needle Kit
$32.00 SGD
$32.00 SGD
Used to fill shocks with self-sealing type rubber valve.
Bearing Driver Set Bearing Driver Set
$139.00 SGD
$139.00 SGD
Set fits bearing with 8-30 mm I.D. and 32-47 mm O.D. Set provides one durable steel handle and 12 sizes of anodized aluminium adapters :8mm, 10mm, 12mm, 15mm, 17mm, 20mm, 25mm, 30mm, 32mm, 35mm, 40...
Valve Core Remover Valve Core Remover
$12.00 SGD
$12.00 SGD
Ideal tool to remove and install standard valve cores in tubed or tubeless valve stems (Schrader valve) easily.
Brake and Clutch Cable Injector Brake and Clutch Cable Injector
$12.00 SGD
$12.00 SGD
This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil.
4-in-1 Fork Bleed Tool
$32.00 SGD
$32.00 SGD
The tool provides 4 thread pitches of M10 x 1.0, M10 x 1.25, M12 x 1.0 and M12 x 1.25 which will work on almost any known street fork.
Fork Bleeding Tool Set Fork Bleeding Tool Set
$40.00 SGD
$40.00 SGD
It can easily thread onto the damping rod to facilitate cartridge fork bleeding and prevent the typical mess when changing fork oil. Set provides adapters for 10mm x 1.0mm, 12mm x 1.0mm, 12mm x 1.2...
Damping Rod Tool
$40.00 SGD
$40.00 SGD
Allows the damping rod to retrieve effortlessly after spring installation.Works on Kayaba, Showa and WP inverted forks. Tool provides one rod w/ M10x1.0 end and four brass hex adapters are included...
Piston Detaching Tool
$39.00 SGD
$39.00 SGD
Ideal tool to detach a piston from the disk brake base of a motor vehicle. The adjusting screw design, which is able to adjust the distance between two grasping portions and make the outer walls of...
1 1
$39.00 SGD
$39.00 SGD
Features 1" Drive Standard Length 6 Points Metric Size
3/4 3/4
$35.00 SGD
$35.00 SGD
Features 3/4" drive Deep Length 6 points Metric size
Divider Set for BOXO 7/8-Drawer Tool Cabinet (5 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (5 slots)
$110.00 SGD
$110.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  3 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 1 pc - Alu...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (7 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (7 slots)
$135.00 SGD
$135.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  3 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 3 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (6 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (6 slots)
$125.00 SGD
$125.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  3 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 2 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (9 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (9 slots)
$152.00 SGD
$152.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  4 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 6 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (8 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (8 slots)
$148.00 SGD
$148.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  4 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 5 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (9 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (9 slots)
$152.00 SGD
$152.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  5 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 5 pcs - A...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (14 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (14 slots)
$195.00 SGD
$195.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  5 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 10 pcs - A...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (13 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (13 slots)
$190.00 SGD
$190.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  5 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 9 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (12 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (12 slots)
$185.00 SGD
$185.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  5 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 8 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (8 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (8 slots)
$148.00 SGD
$148.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  3 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 3 pcs - Al...
Divider Set for BOXO 7/8-Drawer Tool Cabinet (7 slots) Divider Set for BOXO 7/8-Drawer Tool Cabinet (7 slots)
$135.00 SGD
$135.00 SGD
Suitable for BOXO 7 or 8-Drawer Tool Cabinet.  What's included 2 pcs - Top & Bottom Fix Panel (L 570 x H 52 x D 20 mm )  3 pcs - Straight Vertical Partition (L 390 x H 50 x D 20 mm) 3 pcs - Al...
1/2
from $8.80 SGD
from $8.80 SGD
Features Mirror Chrome Finish protects against corrosion & is easy to clean. 6 Pt Socket with Positive Grip Broaching Knurled Ring at base of socket provides grip surface to turn socket with ...
Choose Options
EX Procedure Cart with Proximity Lock EX Procedure Cart with Proximity Lock
Request for Quote
For product catalogue, please click here. BAILIDA procedure cart has electronic lock with keyless entry and automatic re-locking for security. It includes authorized management and view all user...
Extra Reach Adjustment Screwdriver
$39.00 SGD
$39.00 SGD
Hard jobs just became easier. Extra long for use with multibank carbs or any other deep reach needed, this screwdriver features a precision-made, hardened steel bit.
1/4
$37.00 SGD
$37.00 SGD
Sliding and folding the T-handle makes for a compact tool. The BikeMaster 14" Compact Sliding and Folding T-Handle is made of heat-treated vanadium steel and is chrome-plated for durability and lon...
1/4
$56.00 SGD
$56.00 SGD
Made from heat-treated vanadium steel and chrome-plated for durability and long life, the T-handle has ball-bearing detent socket holders on each leg. It features a black chrome coating for a great...
T-Handle 3 Way Socket T-Handle 3 Way Socket
$19.00 SGD
$19.00 SGD
Compact size for an easy fit in many fanny packs. Built solid from chrome-vanadium tool steel for corrosion resistance and durability. 8mm, 10mm and 12mm sockets are welded in place on the tri-sock...
5 Gallon Utility Jug Spout
$34.00 SGD
$34.00 SGD
BikeMaster 5 Gallon Utility Jug has a squared-off design for a flush fit against flat surfaces, minimizing the chance of rolling or spilling. Made with HDPE ( High-Density Polyethylene) for toughne...
Spoke Wrench Set
$98.00 SGD
$98.00 SGD
Made from chrome-vanadium steel for long life and chrome-plated for corrosion resistance, these super-accurate wrench ends make spoke adjustment a snap. The size range covers mini-bikes to full-bor...
Steering Stem Bearing Removal Tool 25mm-40mm
$78.00 SGD
$78.00 SGD
No more fighting or regrettable damage to the steering stem. The Steering Stem Bearing Removal Tool from BikeMaster allows for simple installation and execution. Made from hardened steel with a bla...

SIMZWerkz Physical Store

a: 5G Gambas Crescent, Nordcom I
     S(757043)
p: +65 6458 2722​ 
m: hello@simzwerkz.com

Mon to Fri 9am to 8pm
Sat 10am to 5pm
Closed on Sun & PH

Get directions

SIMZWerkz Physical Store