Mospec

15 products

$32.00 SGD

The tool provides 4 thread pitches of M10 x 1.0, M10 x 1.25, M12 x 1.0 and M12 x 1.25 which will work on almost any known street fork.

Mospec

$139.00 SGD

Set fits bearing with 8-30 mm I.D. and 32-47 mm O.D. Set provides one durable steel handle and 12 sizes of anodized aluminium adapters :8mm, 10mm, 12mm, 15mm, 17mm, 20mm, 25mm, 30mm, 32mm, 35mm, 40...

Mospec

$12.00 SGD

This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil.

Mospec

$48.00 SGD

Ideal tool to hold the clutch drum in place which can remove the nut holding it on. This holder is equipped with two bolts and washers, the mounting holes are slotted so that are easier to install ...

Mospec

$25.00 SGD

Ideal tool to truly add or remove fluid from the hydraulic clutch. Fits all KTM motorcycles with hydraulic clutch.

Mospec

$136.00 SGD

It is twist-proof with screws of clutch cover fixed to the engine housing.The additional adapter ring provides height compensation for the 48 tooth clutches. Fits all standard 12-tooth baskets of D...

Mospec

$86.00 SGD

A sturdy stand holds cylinder heads safely and securely while you repair cracks, grind seats, clean carbon or perform guide work.There is ample clearance under heads for knurling and reaming valve ...

Mospec

$40.00 SGD

Allows the damping rod to retrieve effortlessly after spring installation.Works on Kayaba, Showa and WP inverted forks. Tool provides one rod w/ M10x1.0 end and four brass hex adapters are included...

Mospec

$40.00 SGD

It can easily thread onto the damping rod to facilitate cartridge fork bleeding and prevent the typical mess when changing fork oil. Set provides adapters for 10mm x 1.0mm, 12mm x 1.0mm, 12mm x 1.2...

Mospec

$32.00 SGD

Used to fill shocks with self-sealing type rubber valve.

Mospec

$39.00 SGD

Ideal tool to detach a piston from the disk brake base of a motor vehicle. The adjusting screw design, which is able to adjust the distance between two grasping portions and make the outer walls of...

Mospec

$108.00 SGD

Used to replace the compression needle from the shock body on WP PDS shocks.It has two locator washers that allow the tool to rest inside the shock body and not get skewed while tightening or loose...

Mospec

$29.00 SGD

Used to accurately locate top dead center of the piston’s stroke.Use this tool, you will not have to remove the plug and measure it.Use this tool with a cam degree wheel to dial in the cam for maxi...